Recent Advances in the Application of P(III)-Nucleophiles to Create New P-C Bonds through Michaelis-Arbuzov-Type Rearrangement.

Organophosphorus compounds have long been considered valuable in both organic synthesis and life science. P(III)-nucleophiles, such as phosphites, phosphonites, and diaryl/alkyl phosphines, are particularly noteworthy as phosphorylation reagents for their ability to form new P-C bonds, producing more stable, ecofriendly, and cost-effective organophosphorus compounds. These nucleophiles follow similar phosphorylation routes as in the functionalization of P-H bonds and P-OH bonds. Activation can occur through photocatalytic, electrocatalytic, or thermo-driven reactions, often in coordination with a Michaelis-Arbuzov-trpe rearrangement process, to produce the desired products. As such, this review offers a thorough overview of the phosphorylated transformation and potential mechanisms of P(III)-nucleophiles, specifically focusing on developments since 2010. Notably, this review may provide researchers with valuable insights into designing and synthesizing functionalized organophosphorus compounds from P(III)-nucleophiles, guiding future advancements in both research and practical applications.

The First Example of the Friedel-Crafts Cyclization Leading to (10-Hydroxy-9,10-dihydroanthr-9-yl)phosphonium Salts without the Expected Bradsher Dehydration.

The reaction of (ortho-acetalaryl)arylmethanols with various phosphines PR1R2R3 (R1 = R2 = R3 = Ph; R1 = R2 = Ph, R3 = Me and R1 = R2 = Me, R3 = Ph) under acidic conditions (e.g., HCl, HBF4, TsOH) unexpectedly led to the formation of (10-hydroxy-9,10-dihydroanthr-9-yl)phosphonium salts instead of the corresponding anthryl phosphonium salts. The cyclization occurred according to the Friedel-Crafts mechanism but without the usually observed Bradsher dehydration, giving cyclic products in the form of cis/trans isomers and their conformers. In case of electron-rich and less-hindered dimethylphenylphosphine, all four stereoisomers were recorded in 31P{1H} NMR spectra, while for the other phosphines, only the two most stable cis/trans stereoisomers were detected. This study was supported by DFT and NCI calculations in combination with FT-IR analysis.

A synthetic cycle for iminophosphorane synthesis involving direct intermolecular NP bond formation on N2-derived molybdenum nitride.

NP bonds were built straightforwardly between N2-derived molybdenum terminal nitride and phosphines. Subsequent PCET, oxidative decarbonylation and then reduction regenerated the N2 complex, developing a synthetic cycle transferring N2 into various iminophosphoranes. Both aryl and alkyl substituted phosphines proceeded smoothly.

Mechanisms of the Reaction of Elemental Sulfur and Polysulfides with Cyanide and Phosphines.

The reactions of elemental sulfur (S8 ) and polysulfides with nucleophiles are relevant to organic synthesis, materials science and biochemistry, but the mechanisms by which they operate are still unknown due to the inherent thermodynamic and kinetic instability of polysulfide intermediates. Using Density Functional Theory (DFT) calculations at the ωB97X-D/aug-cc-pV(T+d)Z/SMD(MeCN) // ωB97X-D/aug-cc-pVDZ/SMD(MeCN) level of theory, we studied the mechanisms behind the reaction of elemental sulfur and polysulfides with cyanide and phosphines, which quantitatively generate the monosulfide products thiocyanate and phosphine sulfides, respectively. All plausible pathways including nucleophilic decomposition, unimolecular decomposition, scrambling reactions, and attack on thiosulfoxides, have been considered to provide the first comprehensive mechanistic picture for this class of reactions. Overall, intramolecular cyclization is identified as the most favorable decomposition pathway for long polysulfides. For short polysulfides, a mixture of unimolecular decomposition, nucleophilic attack, and scrambling pathways can be expected.

Hybrid Phosphine/Amino-Acid Ligands Built on Phenyl and Ferrocenyl Platforms: Application in the Suzuki Coupling of o-Dibromobenzene with Fluorophenylboronic Acid.

We describe the synthesis and characterization of two classes of hybrid phosphino ligands functionalized with amino ester or amino acid groups. These compounds are built either on a rigid planar phenyl platform or on a functionalized - conformationally controlled - rotational ferrocene backbone. Modifications at the -PR2 phosphino groups (R=aryl and alkyl, with various steric bulk, Ph, Mes, i-Pr, Cy) and at the amino acid/amino ester functions are reported, showing a valuable high modularity. The coordination chemistry of these compounds regarding palladium and gold was investigated, in particular with respect to the coordination mode of the phosphino groups and the preferred interaction with metals for the amino ester and amino acid functions. For all the hybrid ligands, based either on ferrocenyl or phenyl platforms, the (P,N)-chelating effect dominates in solution for coordination to Pd(II), while linear P-Au(I) complexes without interaction with the amino groups are assumed. The investigation of the catalytic activity of these new ligands in the demanding palladium-catalyzed Suzuki-Miyaura coupling of o-dibromoarenes with fluorophenylboronic acid underlined the importance of the amino ester dicyclohexylphosphinoferrocene for avoiding the deleterious homocoupling and arene oligomerization side-reactions that were otherwise observed with the other phosphine ligands.

Reactivity of NiII, PdII and PtII complexes bearing phosphine ligands towards ZnII displacement and hydrolysis in Cis2His2 and Cis3His zinc-fingers domains.

A systematic study of the effect of phosphine and bis-phosphine ligands in the interaction of NiII, PdII, and PtII complexes with two classes of zinc fingers was performed. The Cys2His2, finger 3 of specific protein-1, and the Cys2HisCys C-terminal zinc finger of nucleocapsid protein 7 of the HIV-1 were used as models of the respective class. In general, phosphine ligands favor the metal binding to the peptide, although the bis-phosphine ligands produce more specific binding than the monodentate. In the case of nickel complexes, the interaction of NiII ions with the sequence SKH, present in Cys2His2, results in hydrolysis, contrasting to the preferred zinc ejection produced by the NiII complexes with chelating phosphines, producing Ni(bis-phosphine) fingers. In the absence of the SKH sequence, zinc ejection is observed with the formation of nickel fingers, with reactivity dependent on the phosphine. On the other hand, Pd(phosphines) produces Pd2 fingers in the case of triphenylphosphine with the phosphine coordinated as intermediate species. The bis-phosphine ligands produce very clean spectra and a stable signal Pd(bis-phosphine)finger. Interestingly, phosphines produce very reactive platinum complexes, which eject zinc and promote peptide hydrolysis. The results reported here are relevant to the understanding of the mechanism of these interactions and how to modulate metallocompounds for zinc finger interference.

Organocatalyzed Phospha-Michael Addition: A Highly Efficient Synthesis of Customized Bis(acyl)phosphane Oxide Photoinitiators.

Addition of the P-H bond in bis(mesitoyl)phosphine, HP(COMes)2 (BAPH), to a wide variety of activated carbon-carbon double bonds as acceptors was investigated. While this phospha-Michael addition does not proceed in the absence of an additive or catalyst, excellent results were obtained with stoichiometric basic potassium or caesium salts. Simple amine bases can be employed in catalytic amounts, and tetramethylguanidine (TMG) in particular is an outstanding catalyst that allows the preparation of bis(acyl)phosphines, R-P(COMes)2 , under very mild conditions in excellent yields after only a short time. All phosphines RP(COMes)2 can subsequently be oxidized to the corresponding bis(acyl)phosphane oxides, RPO(COMes)2 , a substance class belonging to the most potent photoinitiators for radical polymerizations known to date. Thus, a simple and highly atom economic method has been found that allows the preparation of a broad range of photoinitiators adapted to their specific field of application even on a large scale.

Facile Assembly of Modular-Type Phosphines for Tackling Modern Arylation Processes.

This Account presents an overview of a promising collection of phosphine ligands simply made from the modular Fischer indolization process and their applications in modern arylation processes. Using one easily accessible 2-arylindole scaffold, three major phosphino-moiety-positioned ligand series can be readily generated. We have attempted to explore challenging electrophilic and nucleophilic partners for the coupling reaction using the modular ligand tool. For the electrophilic partner study, CM-phos-type ligands, where the phosphino group is located at the 2-arene position of 2-arylindole, allow the successful cross-coupling of aryl mesylates. The CM-phos ligand forms a palladacycle before entering the cross-coupling catalytic cycle. For the nucleophilic partner investigation, the indole C3-positioned phosphines show the first accomplishment of Pd-catalyzed organotitanium nucleophile arylation. Indeed, the aryl-titanium nucleophile undergoes cross-coupling more efficiently than does the organoboron coupling partner in particular cases. Moreover, in the indole C3-positioned phosphine series, the -PPh2-containing ligands perform better in the highly sterically hindered cross-coupling of aryl chlorides than do ligands containing the -PCy2 moiety. The catalyst loading can even be reduced to 0.2 mol % Pd for tetra-ortho-substituted biaryl synthesis. This finding offers a new perspective on the next-generation design of phosphine ligands in which the sterically bulky and electron-rich -PR2 group (R = alkyl) may not be necessary for the cross-coupling of aryl chlorides. In general, we hypothesize that a good balance of steric and electronic properties for entertaining the oxidative addition and reductive elimination steps is crucial to the success of the reaction. For the steric factor, the highly sterically congested -PR2 group normally favors the reductive elimination, yet we conjecture that this sterically bulky group would serve as an obstacle for the incoming aryl halides. For the electronic factor, the electron rich -PR2 group is believed to support the oxidative cleavage of the C(Ar)-Cl bond by donating more electron density to the corresponding σ* orbital. Nevertheless, the high electron richness of the -PR2 group may disfavor the reductive elimination electronically. Overall, an appropriate balance of both electron density and steric bulkiness is suggested to allow the sterically hindered cross-coupling to proceed smoothly. We have found that the -PPh2-containing ligand is a good starting point for this investigation. The formation of aromatic carbon-carbon (C-C) and carbon-heteroatom (C-X) bonds from aryl chlorides was successfully realized using our proprietary phosphines.In addition to the indole-core-bearing ligand skeleton, we also explored the relevant imidazolyl and carbazolyl phosphines for their unique applications. Interestingly, the carbazolyl ligand, having more flexible C-N axial chirality, displays particular interchangeable Pd-N and Pd-arene coordination, which facilitates both oxidative addition and reductive elimination processes. Moreover, this C-N axially chiral ligand allows the successful asymmetric Suzuki-Miyaura coupling for attaining the most sterically hindered tetra-ortho-substituted biaryls with excellent enantioselectivity. The rationale behind these scientifically interesting findings is presented in detail.

Revisiting the anticancer properties of phosphane(9-ribosylpurine-6-thiolato)gold(I) complexes and their 9H-purine precursors.

New mono- and di-nuclear thio-purine and thio-purine nucleoside gold(I) complexes were synthesized, characterized, and evaluated in vitro for biological activities in comparison to related known purine complexes. By combining known anti-tumoral thio-purines with R3PAu moieties as present in auranofin, complexes with enhanced effects and selectivities were obtained, which not only act as cytostatics, but also disrupt tumor-specific processes. Their IC50 values in cytotoxicity test with tumor cell lines ranged from three-digit nanomolar to single-digit micromolar, revealing a tentative structure-activity relationship (SAR). Both the residues R2 of the phosphane ligand and R1 at C2 of the pyrimidine ring had a significant impact on the cytotoxicity. In most cases, the introduction of a ribo-furanosyl group at N9 of the purine led to a distinctly more cytotoxic complex. Most complexes were more active against multi-drug-resistant tumor cells or such lacking functional p53 when compared to the respective untreated wild type cell lines. Some nucleoside complexes displayed an interesting dose-dependent dual mode of action regarding cell cycle arrest and DNA repair mechanism. Some phosphane(purine-6-thiolato)gold (I) complexes had a stronger inhibitory effect on the thioredoxin reductase (TrxR) and on the reactive oxygen species (ROS) generation in cancer cells than is typical of other gold complexes. They also led to DNA fragmentation and showed anti-angiogenic effects. Their stability under test conditions was demonstrated by 77Se NMR monitoring of an exemplary selenopurine complex.

Structure-Reactivity Relationships of Buchwald-Type Phosphines in Nickel-Catalyzed Cross-Couplings.

The dialkyl-ortho-biaryl class of phosphines, commonly known as Buchwald-type ligands, are among the most important phosphines in Pd-catalyzed cross-coupling. These ligands have also been successfully applied to several synthetically valuable Ni-catalyzed cross-coupling methodologies and, as demonstrated in this work, are top performing ligands in Ni-catalyzed Suzuki Miyaura Coupling (SMC) and C-N coupling reactions, even outperforming commonly employed bisphosphines like dppf in many circumstances. However, little is known about their structure-reactivity relationships (SRRs) with Ni, and limited examples of well-defined, catalytically relevant Ni complexes with Buchwald-type ligands exist. In this work, we report the analysis of Buchwald-type phosphine SRRs in four representative Ni-catalyzed cross-coupling reactions. Our study was guided by data-driven classification analysis, which together with mechanistic organometallic studies of structurally characterized Ni(0), Ni(I), and Ni(II) complexes allowed us to rationalize reactivity patterns in catalysis. Overall, we expect that this study will serve as a platform for further exploration of this ligand class in organonickel chemistry as well as in the development of new Ni-catalyzed cross-coupling methodologies.

Tri(N-carbazolyl)phosphine Gold(I) Complexes: Structural and Catalytic Activity Studies.

Twelve tri(N-carbazolyl)phosphine gold(I) complexes, bearing both protonated and deuterated aryl phosphorous triamide-type ligands, have been synthesized and characterized. An elusive Au-H(D) interaction between the H(D) atoms of the tri(N-carbazolyl)phosphine ligand at the H-1(D-1) position of the carbazolyl ring and the central gold atom was observed. Complexes 5(H)/5(D) bearing the dibrominated tri(N-carbazolyl)phosphine ligand exhibit isotopic polymorphism, in which two dramatically different crystal-packing modes between the protonated and deuterated forms occur. The catalytic potential of these complexes has been showcased in the gold(I)-catalyzed glycosylation with glycosyl o-alkynylbenzoates as donors, with TON being up to 27 000.

Cobalt Cyclopentadienyl-Phosphine Dinitrogen Complexes.

By applying the potassium salts of cyclopentadienyl-phosphine ligands LK to CoCl2 , the corresponding cobalt chlorides (1, LCoII Cl) were prepared. By reducing complexes 1 with KHBEt3 under a N2 atmosphere, bridging end-on complexes, LCoI -N2 -CoI L (2 a and 2 b), were successfully obtained. 15 N2 -labeled [15 N2 ]-2 a was prepared under 15 N2 /14 N2 exchange in THF solution. LCoI -N2 -CoI L complex 2 a could react with P4 molecules to release N2 and generate a Co-P4 -Co moiety 4. Further reduction of complex 2 b led to cleavage of a P-C bond in the cyclopentadienyl-phosphine ligand to provide novel µ-PCy2 -bridged Co0 -N2 complex 5. DFT calculations confirmed the experimental observations.

Synthesis and Characterization of Phosphinecarboxamide and Phosphinecarbothioamide, and Their Complexation with Palladium(II) Complex.

Reactions of isocyanates/isothiocyanates with primary and secondary phosphines without solvent at room temperature afforded phosphinecarboxamide/phosphinecarbothioamide, respectively, in excellent yields. Furthermore, palladium complex Pd(COD)Cl2 was allowed to react with Ph2PC(O)NHPh (1a) to afford [Pd{Ph2PC(O)NHPh-κP}2Cl2] (3). On the other hand, the reaction of Pd(COD)Cl2 with 1 eq. of Ph2PC(S)NHPh (2a) afforded [PdCl2{Ph2PC(S)NHPh-κP,S}] (4). In the case of a 1:2 molar ratio, [PdCl{Ph2PC(S)NHPh-κP,S}{Ph2PC(S)NHPh-κP}]Cl (5) was formed. The newly obtained compounds were fully characterized using multielement NMR measurements and elemental analyses. In addition, the molecular structures of Ph2PC(O)NH(CH2)2Cl (1j), Ph2PC(S)NHPh(4-Cl) (2c), and 3-5 were determined using single-crystal X-ray diffraction.

Intramolecular Phosphine-Promoted Knoevenagel Based Redox-Reaction.

A Knoevenagel based redox-reaction promoted by intramolecular phosphine sources is presented for the first time. The influence of different diketones, aldehydes, bases and acids was investigated. The effects of different substituents were evaluated based on their electronical influence on the diketone structure. With the obtained results a mechanism is proposed, giving information about transition states formed during the reaction, which can lead to different products. This type of an internal redox transformation with a phosphine oxide moiety remaining in the molecule after the redox reaction represents a new type of reaction.

Bulky oxadithiolate-bridged [FeFe]­hydrogenase mimics [Fe2(µ-R2odt)(CO)4(κ2-diphosphine)] (R = Ph and H) with chelating diphosphines.

In order to develop an attractive generation of bulky oxadithiolate-bridged [FeFe]­hydrogenase mimics with chelating diphosphines, two new series of asymmetrically diphosphine-substituted diiron model complexes [Fe2(µ-R2odt)(CO)4(κ2-diphosphine)] (3-5) with bulky Ph2odt bridge and their reference counterparts (6-8) with common odt bridge were obtained from the Me3NO-assisted substitutions of diiron hexacarbonyl precursors [Fe2(µ-R2odt)(CO)6] (R2odt = (SCHR)2O, R = Ph (1) and H (2)) with different diphosphines such as (Ph2P)2NBn (labelled PNBnP, Bn = benzyl), (Ph2PCH2)2NBn (PCNBnCP), and (Ph2PCH2)2CH2 (DPPP)), respectively. All the as-prepared complexes have been characterized by elemental analysis, IR plus NMR spectroscopies, and particularly by X-ray crystallography for 3-8. It is interesting to note that complexes 3 and 6 chelating by small bite-angle PNBnP diphosphine have the favorable dibasal isomer whereas analogues 4, 5 and 7, 8 chelating by flexible backbone PCNBnCP or DPPP ligands possess the main apical-basal isomer in solution or in the solid state. Further, the electrochemical properties of two pairs of representative complexes 3, 6 and 5, 8 are explored and compared by cyclic voltammetry (CV) in the absence and presence of trifluoroacetic acid (CF3CO2H) as proton source, indicating that the complete protonations of 3, 6 and 5, 8 with higher concentration of CF3CO2H lead to two new catalytic waves for the electrocatalytic proton reduction to hydrogen (H2).

Sterically Controlled Late-Stage Functionalization of Bulky Phosphines.

The fine-tuning of metal-phosphine-catalyzed reactions relies largely on accessing ever more precisely tuned phosphine ligands by de-novo synthesis. Late-stage C-H functionalization and diversification of commercial phosphines offers rapid access to entire libraries of derivatives based on privileged scaffolds. But existing routes, relying on phosphorus-directed transformations, only yield functionalization of C sp 2 -H bonds in a specific position relative to phosphorus. In contrast to phosphorus-directed strategies, herein we disclose an orthogonal functionalization strategy capable of introducing a range of substituents into previously inaccessible positions on arylphosphines. The strongly coordinating phosphine group acts solely as a bystander in the sterically controlled borylation of bulky phosphines, and the resulting borylated phosphines serve as the supporting ligands for palladium during diversification through phosphine self-assisted Suzuki-Miyaura reactions.

Cationic palladium(II)-indenyl complexes bearing phosphines as ancillary ligands: synthesis, and study of indenyl amination and anticancer activity.

The reactivity of palladium(II) indenyl derivatives and their applications are topics relatively less studied, though in recent times these compounds have been used as pre-catalysts able to promote challenging cross-coupling processes. Herein, we propose the first systematic study concerning the nucleophilic attack on the palladium(II) coordinated indenyl fragment and, for this purpose, we have prepared a library of new Pd-indenyl complexes bearing mono- or bidentate phosphines as spectator ligands, developing specific synthetic strategies. All novel compounds are thoroughly characterized, highlighting that the indenyl ligand presents always a hapticity intermediate between η3 and η5. Secondary amines have been chosen as nucleophiles for the present study and indenyl amination has been monitored by UV-Vis and NMR spectroscopies, deriving a second order rate law, with dependence on both complex and amine concentrations. The rate-determining step of the process is the initial attack of the amine to the coordinated indenyl fragment, and this conclusion has been supported also by DFT calculations. The determination of second order rate constants has allowed us to assess the impact of the phosphine ligands on the kinetics of the process and identify the steric and electronic descriptors most suitable for predicting the reactivity of these systems. Finally, in vitro tests have proven that these organometallic compounds promote antiproliferative activity towards ovarian cancer cells better than cisplatin and possibly by adopting a different mechanism of action.

Synthesis of Mixed Arylalkyl Tertiary Phosphines via the Grignard Approach.

Trialkyl and triaryl phosphines are important classes of ligands in the field of catalysis and materials research. The wide usability of these low-valent phosphines has led to the design and development of new synthesis routes for a variety of phosphines. In the present work, we report the synthesis and characterization of some mixed arylalkyl tertiary phosphines via the Grignard approach. A new asymmetric phosphine is characterized extensively by multi-spectroscopic techniques. IR and UV-Vis spectra of some selected compounds are also compared and discussed. Density functional theory (DFT)-calculated results support the formation of the new compounds.

Synthesis of diphenyl-(2-thienyl)phosphine, its chalcogenide derivatives and a series of novel complexes of lanthanide nitrates and triflates.

A novel synthesis of diphenyl(2-thienyl)phosphine, along with its' oxide, sulfide and selenide derivatives, is reported here. These phosphines have been characterized by NMR, IR, MS and X-Ray crystallography. The phosphine oxide derivative was reacted with a selection of lanthanide(III) nitrates and triflates, LnX3, to give the resultant metal-ligand complexes. These complexes have also been characterized by NMR, IR, MS and X-Ray crystallography. Single crystal X-Ray diffraction data shows a difference in metal-ligand complex stoichiometry and stereochemistry depending on the counteranion (nitrate vs. triflate). The [Ln(Ar3PO)3(NO3)3] ligand-nitrate complexes are nine-coordinate to the metal in the solid state (bidentate nitrate), featuring a 1 : 3 lanthanide-ligand ratio and bear an overall octahedral arrangement of the six, coordinated ligands. Our [Ln(Ar3PO)3(NO3)3] ligand-nitrate complexes gave three examples of fac-stereochemistry, where mer-stereochemistry is almost universally observed in the literature of highly related [Ln(Ar3PO)3(NO3)3] complexes. For the Tb complexes, two different arrangements of the ligands around the metal were observed in the solid state for [Tb(Ar3PO)3(NO3)3] and [Tb(Ar3PO)4(OTf)2] [OTf]. [Tb(Ar3PO)3(NO3)3] is strictly nine-coordinate, ligand mer-stereochemistry in the solid state, and [Tb(Ar3PO)4(OTf)2] [OTf] is strictly octahedral, six-coordinate, with a square-planar stereochemical arrangement of the phosphine oxide ligands around the metal.

Thiol Catalysis of Selenosulfide Bond Cleavage by a Triarylphosphine.

The arylthiol 4-mercaptophenylacetic acid (MPAA) is a powerful catalyst of selenosulfide bond reduction by the triarylphosphine 3,3',3″-phosphanetriyltris(benzenesulfonic acid) trisodium salt (TPPTS). Both reagents are water-soluble at neutral pH and are particularly adapted for working with unprotected peptidic substrates. Contrary to trialkylphosphines such as tris(2-carboxyethyl)phosphine hydrochloride (TCEP), TPPTS has the advantage of not inducing deselenization reactions. We believe that the work reported here will be of value for those manipulating selenosulfide bonds in peptidic or protein molecules.